Datasheets

Now that we know that even the mighty LED has its limits, we need to make sure we stay below those limits. Being kind to your LEDs will let them last longer and keep them shiny & bright!

Lets examine the specification sheet for a 5mm LED, specification sheets are also called datasheets. Datasheets are immensly useful, they have all the information you need for an electronic component. You can download the datasheet we'll be referring to here.

The first useful thing you'll find is the dimensional 'package' information. The 'package' here is the LED itself.

As you can see, the main diameter of the LED is 5mm (its a '5mm LED') and there's a lip that makes it around 6mm. The lip can make it handy if you're gluing the LED into a drilled hole, so it doesnt fall through. The datasheet also tells you which pin is the cathode and other lengths and sizes. Note that the figures are in mm with the inches in ()'s afterwards.

Keep scrolling down. Next you'll find this small table. This section tells you how bright the LED is in mcd. Since these are general purpose LEDs, the brightness can vary a bit, these LEDs average around 250 mcd, but the manufacturer may sell you LEDs that are as dim as 180mcd. This variation is pretty standard.

Later on the same page, is the electrical characteristics table.

Technical Data Sheet
5 mm Round White LED (T-13/4)
3294-15/T2C9-1HMB
Everlight Electronics Co., Ltd. http\\:www.everlight.com Rev: 1 Page: 1 of 9
Device Number: DLE-329-008 Established date:3-10-2006 Established by: Amy Ma
Features
․Popular T-13/4 colorless 5mm package.
․High luminous power.
․Typical chromaticity coordinates x=0.29, y=0.28
according to CIE1931.
․Bulk, available taped on reel.
․ESD-withstand voltage: up to 4KV
․The product itself will remain within RoHS compliant version.


Descriptions
․The series is designed for application required
high luminous intensity.
․The phosphor filled in the reflector converts the
blue emission of InGaN chip to ideal white.



Applications
․Outdoor Displays
․Optical Indicators
․Backlighting
․Marker Lights



Device Selection Guide
Chip
PART NO.
Material Emitted Color
Lens Color
3294-15/T2C9-1HMB InGaN White Water Clear

Technical Data Sheet
5.0mm Round Type LED Lamps
█ Features :
● Choice of various viewing angles
● Available on tape and reel.
● Reliable and robust
● Pb free
● The product itself will remain within RoHS compliant version.
█ Descriptions :
● The series is specially designed for

applications requiring higher
brightness
● The led lamps are available with
different colors, intensities.
█ Applications :
● TV set
● Monitor
● Telephone
● Computer
333-2SDRT/S530-A3 AlGaInP Hyper Red Red Trans
EVERLIGHT ELECTRONICS CO.,LTD. http : //www.everlight.com Rev.: 3 Page: 1 of 6
Device Number : CDLE-033-920 Prepared date: 2006/2/17 Prepared by: Xiuzen Feng
CG0602036
333-2SDRT/S530-A3
PART NO. Material Emitted Color Lens Color Technical Data Sheet
5.0mm Round Type LED Lamps
Package Dimensions
Notes: 1. All dimensions are in millimetres
2. The height of flange must be less than 1.5mm(0.059").
3. Without special declared,the tolerance is ±0.25mm.
█ Absolute Maximum Ratings at Ta = 25℃
Parameter Symbol Rating Unit
Forward Current IF 25 mA
Operating Temperature Topr -40 to +85 ℃
Storage Temperature Tstg -40 to +100 ℃
ESD 2000 V
Soldering Temperature Tsol 260 ± 5 ℃
Power Dissipation Pd 60 mW
Reverse Voltage VR 5 V
Note: *1:Soldering time ≦ 5 seconds.
EVERLIGHT ELECTRONICS CO.,LTD. http : //www.everlight.com Rev.: 3 Page: 2 of 6
Device Number : CDLE-033-920 Prepared date: Prepared by: Xiuzen Feng
333-2SDRT/S530-A3
Electrostatic Discharge
2006/2/17 Technical Data Sheet
5.0mm Round Type LED Lamps
Electro-Optical Characteristics (Ta=25℃)
Symbol Min. Typ. Max. Unit
VF IF= 20 mA ／ 2.0 2.4 V
IR VR= 5 V ／ ／ 10 μA
Iv IF= 20 mA 500 1250 ／ mcd
2θ1/2 IF= 20 mA ／ 10 ／ deg

λp IF= 20 mA ／ 632 ／ nm
λd IF= 20 mA ／ 624 ／ nm
△λ IF= 20 mA ／ 20 ／ nm

EVERLIGHT ELECTRONICS CO.,LTD. http : //www.everlight.com Rev.: 3 Page: 3 of 6
Device Number : CDLE-033-920 Prepared date: Prepared by: Xiuzen Feng
Peak Wavelength
Dominant Wavelength
Spectrum Radiation
Bandwidth
Forward Voltage
Reverse Current
Luminous Intensity
Viewing Angle
333-2SDRT/S530-A3
Parameter Condition
2006/2/17 Technical Data Sheet
5.0mm Round Type LED Lamps
█ Typical Electro-Optical Characteristic Curves:



EVERLIGHT ELECTRONICS CO.,LTD. http : //www.everlight.com Rev.: 3 Page: 4 of 6
Device Number : CDLE-033-920 Prepared date: 2006/2/17 Prepared by: Xiuzen Feng
333-2SDRT/S530-A3 Technical Data Sheet
5.0mm Round Type LED Lamps
█ Reliability test items and conditions:
The reliability of products shall be satisfied with items listed below.
Confidence level：97%
LTPD：3%
NO Item Test Conditions Sample Size
Failure
Judgment
Criteria
1 Solder Heat TEMP : 260℃ ± 5 ℃ 76 PCS
H : +100℃ 15min
2 Temperature Cycle ∫ 5 min 76 PCS
L : -40℃ 15min
H : +100℃ 5min
3 Thermal Shock ∫ 10 sec 76 PCS
L : -10℃ 5min
4 High Temperature
Storage TEMP : 100℃ 76 PCS
5 Low Temperature
Storage TEMP : -40℃ 76 PCS
TEMP : 25℃
IF = 20mA
7 High Temperature /
High Humidity 85℃ / 85% RH 76 PCS
Note：Ivt：To test Iv value of the chip before the reliablility test
Iv：The test value of the chip that has completed the reliablility test
U：Upper Specification Limit
L： Lower Specification Limit
EVERLIGHT ELECTRONICS CO., http : //www.everlight.com Rev.: 3 Page: 5 of 6
Device Number : CDLE-033-920 Prepared by:
1000 HRS
1000 HRS
1000 HRS
333-2SDRT/S530-A3
6 DC Operating Life
Ac/Re
0/1
0/1
0/1
0/1
0/1
0/1
Iv≦Ivt*0.5 or
Vf≧U or
Vf≦L
Prepared date: 2006/2/17 Xiuzen Feng
Test
Hours/Cycle
10 SEC
0/1
76 PCS
300 CYCLES
300 CYCLES
1000 HRS Technical Data Sheet
5.0mm Round Type LED Lamps
Packing Quantity Specification
1. 500PCS/1Bag，5Bags/1Box
2. 10Boxes/1Carton
Label Form Specification
CPN: Customer's Production Number
P/N : Production Number
QTY: Packing Quantity
CAT: Ranks
HUE: Dominant Wavelength
REF: Reference
LOT No: Lot Number

Notes
1. Above specification may be changed without notice. EVERLIGHT will reserve authority on
material change for above specification.
2. When using this product, please observe the absolute maximum ratings and the instructions
for using outlined in these specification sheets. EVERLIGHT assumes no responsibility for
any damage resulting from use of the product which does not comply with the absolute
maximum ratings and the instructions included in these specification sheets.
3. These specification sheets include materials protected under copyright of EVERLIGHT corporation
Please don’t reproduce or cause anyone to reproduce them without EVERLIGHT’sconsent.
EVERLIGHT ELECTRONICS CO.,LTD. http : //www.everlight.com Rev.: 3
Device Number : CDLE-033-920 Prepared date: 2006/2/17 Prepared by:
Page: 6 of 6
Xiuzen Feng
333-2SDRT/S530-A3
EVERLIGHT ELECTRONICS CO., LTD. Tel: 886-2-2267-2000, 2267-9936
Office: No 25, Lane 76, Sec 3, Chung Yang Rd, Fax: 886-2267-6244, 2267-6189, 2267-6306
Tucheng, Taipei 236, Taiwan, R.O.C http:\\www.everlight.com
333-2SDRT/S530-A3

LED Components

 

Wavelength (nm)	Color Name	Fwd Voltage (Vf @ 20ma)	Intensity 5mm LEDs	Viewing Angle	LED Dye Material
	940	Infrared	1.5	16mW @50mA	15°	GaAIAs/GaAs -- Gallium Aluminum Arsenide/Gallium Arsenide
	880	Infrared	1.7	18mW @50mA	15°	GaAIAs/GaAs -- Gallium Aluminum Arsenide/Gallium Arsenide
	850	Infrared	1.7	26mW @50mA	15°	GaAIAs/GaAs -- Gallium Aluminum Arsenide/Gallium Aluminum Arsenide
	660	Ultra Red	1.8	2000mcd @50mA	15°	GaAIAs/GaAs -- Gallium Aluminum Arsenide/Gallium Aluminum Arsenide
	635	High Eff. Red	2.0	200mcd @20mA	15°	GaAsP/GaP - Gallium Arsenic Phosphide / Gallium Phosphide
	633	Super Red	2.2	3500mcd @20mA	15°	InGaAIP - Indium Gallium Aluminum Phosphide
	620	Super Orange	2.2	4500mcd @20mA	15°	InGaAIP - Indium Gallium Aluminum Phosphide
	612	Super Orange	2.2	6500mcd @20mA	15°	InGaAIP - Indium Gallium Aluminum Phosphide
	605	Orange	2.1	160mcd @20mA	15°	GaAsP/GaP - Gallium Arsenic Phosphide / Gallium Phosphide
	595	Super Yellow	2.2	5500mcd @20mA	15°	InGaAIP - Indium Gallium Aluminum Phosphide
	592	Super Pure Yellow	2.1	7000mcd @20mA	15°	InGaAIP - Indium Gallium Aluminum Phosphide
	585	Yellow	2.1	100mcd @20mA	15°	GaAsP/GaP - Gallium Arsenic Phosphide / Gallium Phosphide
	4500K	"Incan- descent" White	3.6	2000mcd @20mA	20°	SiC/GaN -- Silicon Carbide/Gallium Nitride
	6500K	Pale White	3.6	4000mcd @20mA	20°	SiC/GaN -- Silicon Carbide/Gallium Nitride
	8000K	Cool White	3.6	6000mcd @20mA	20°	SiC/GaN - Silicon Carbide / Gallium Nitride
	574	Super Lime Yellow	2.4	1000mcd @20mA	15°	InGaAIP - Indium Gallium Aluminum Phosphide
	570	Super Lime Green	2.0	1000mcd @20mA	15°	InGaAIP - Indium Gallium Aluminum Phosphide
	565	High  Efficiency  Green	2.1	200mcd @20mA	15°	GaP/GaP - Gallium Phosphide/Gallium Phosphide
	560	Super Pure Green	2.1	350mcd @20mA	15°	InGaAIP - Indium Gallium Aluminum Phosphide
	555	Pure Green	2.1	80mcd @20mA	15°	GaP/GaP - Gallium Phosphide/ Gallium Phosphide
	525	Aqua Green	3.5	10,000mcd @20mA	15°	SiC/GaN - Silicon Carbide / Gallium Nitride
	505	Blue Green	3.5	2000mcd @20mA	45°	SiC/GaN - Silicon Carbide / Gallium Nitride
	470	Super Blue	3.6	3000mcd @20mA	15°	SiC/GaN - Silicon Carbide / Gallium Nitride
	430	Ultra Blue	3.8	100mcd @20mA	15°	SiC/GaN - Silicon Carbide / Gallium Nitride

Relative Intensity vs Wavelength (P)

Forward Current vs  Forward Voltage Red 5,  Ultra Red 4,  HE Red 6,  Orange 7,  Bright Red 3,  HE Green 9,  Yellow 8

Relative Luminous Intensity vs  Forward Current Ultra Red 4,  HE Red 6,  Orange 7,  Yellow 8,  HE Green 9 Red 5,  Bright Red 3,  Pure Blue C

Forward Current vs  Ambient Air Temperature  Red 5, Ultra Red 4,   HE Red 6,  Orange 7,    HE Green 9,  Ultra Blue D, Yellow 8, Bright Red 3

Relative Luminous Intensity vs  Ambient Temperature Red 5,  Bright Red 3, Ultra Red 4,  HE Green 9,  Yellow 8

Maximum Tolerable Peak Current  vs Pulse Duration  Ultra Red,  Red,  HE Red, Orange,  Yellow,  HE Green,  Ultra Green (523nm), Ultra Green (502nm),  Pure Blue,  Ultra Blue

Bright Red

Backlighting Surfaces Using LEDs
 

 

Tables, Graphs and Images are through the courtesy of LEDtronics  07/10/00

Disclaimer: The information provide herein are basics to educate one on the operating properties and user characteristics of LEDs. We do not imply that the information is accurate or applicable to every aspect of LED usage. Each application will have to be performed on its own merits and with full understanding that damages and injury are the sole responsibility of the "builder". We do not dispense engineering advice. You need to determine the specific products you will need for your specific application.

The LED color chart does NOT represent what OkSolar provide. This chart is only to be used as reference for the various types of LED's being manufactured today, and to show what their basic properties are.

 

Automation - Communications - Energy production and distribution.

OkSolar is an engineering firm that provides solutions tailored to clients that are interested in our unique electronics innovations. Our High-quality components and products are designed to ensure the availability of attractive services to our clients and to provide different individual customized solutions in the 
Electronics Automation Communications hardware and software field.

LED Traffic Signal Light, LED Pedestrian Light, LED Traffic, LED Countdown Timer, Solar LED Streetlight, Solar Powered FAA Type L-810 Aviation Obstruction Light, LED Streetlights, LED Street Lights, LED Street Lamps, LED Street Lights, LED Street Lighting, Retrofit LED Street Lights, Solar LED Streetlight Manufacturer & Exporter.

Energy solutions work best when you are partner with an experienced source that has an outstanding record of products innovations and experience in a wide array of fields related to technical leadership. OkSolar Energy systems and solutions come with an extensive array of innovative features that meet all your applications needs and requirements.

You can check prices or place an order directly through this site. You can also send us a purchase order to receive a price estimate (large orders orders usually receive discounts).

 

 

Main menu

• Home
• LEDs
• Type and colorDatasheets
• About